PRODUCT DATA SHEET





Description

Beram 190 is a hot applied, single component joint and crack sealant. Beram 190 is a blend of asphalts, virgin polymers synthetic rubbers and reinforcing fillers. Beram 190 offers advanced low temperature bonding properties, prolonged resistance to degradation from weather and a positive seal during the expansion and contraction of the joint or crack.

RECOMMENDED USE

Beram 190 is recommended for the large scale sealing of joints and random cracks in Portland cement concrete, and asphaltic concrete pavements.

APPLICABLE SPECIFICATIONS

Beram 190 meets or exceeds:

ASTM D-6690 TYPE 1 (Formerly ASTM D 1190)

Federal Specification SS-S-164 and amendments

AASHTO M-173

Various State and Provincial D.O.T. specifications

APPLICATION TEMPERATURES

Recommended Pouring Temperatures 185C (365F)

Maximum Safe Heating Temperatures 200C (392F)

APPLICATION GUIDELINES

For detailed joint and crack preparation specific application instructions refer to specifying agency publications or contact manufacturer representative.

MELTING EQUIPMENT

Beram 190 must be melted in a double boiler, oil-jacketed kettle, equipped with mechanical agitator and separate temperature thermometers for both the oil bath and melting vat.

COVERAGE

Beram 190 weighs approximately 9.6 lbs./gal (1.15 kg/L). A joint x " (12.7 mm x 12.7 mm) requires approximately 12 lbs. per 100 lineal feet or 17.7 kgs per 100 lineal meters.

PACKAGING

450 lb. (205 kg), open top drums containing 10 individual 50 lb. pucks

2 x 25 lb. polybags in a high strength corrugated cardboard container

50 lb. steel pails

 

 

 

BERAM 190

HOT APPLIED JOINT SEALANT

 

PHYSICAL PROPERTIES

BERAM 190 HOT APPLIED JOINT SEALANT

 

ASTM D-6690 TYPE 1

Formerly ASTM D -1190

PROPERTIES

SPECIFICATIONS

TYPICAL RESULTS

Penetration @ 25C (77F)

150g, 5 sec.

90 MAX.

60

Flow @ 60C (140F)

5 MM MAX.

2.0 MM

ADDITIONAL

PROPERTIES

   
Prolonged Heating ASTM D-3407 (after 6 hours @ pouring temp)

PASS ALL REQUIREMENTS

PASS

Resiliency (ASTM D-3407)

-

50%

Asphalt Compatibility

(ASTM D-3407)

PASS

PASS

 

 

 

 

 

 

 

 

 

McAsphalt Industries Ltd.

8800 Sheppard Avenue East

Toronto, Ontario M1B 5R4

Tel: (416) 281-8181 Fax: (416) 281-8842

Email: info@mcasphalt.com